manualshive.com logo in svg

Projoy Electric PEFS-PL Series, Installation Manual

The Projoy Electric PEFS-PL Series offers unmatched efficiency and performance in its cutting-edge design. Simplify your installation process with our comprehensive Installation Manual, available for free download from 88.208.23.73:8080. This user-friendly manual provides step-by-step instructions to seamlessly set up your PEFS-PL Series, ensuring optimal functionality and hassle-free experience.

Share
Download
background image

Installation Guide                                              

PARTS 

PEFS-PL        

 

PEFS unit - suitable for connecting two solar panels

 

PEFS -ESW         

 

Emergency Rapid Shutdown Switch Unit (excludes 24 VDC power supply)

 

 

INSTALLATION & CONNECTION 

One PEFS-PL will control two solar panels and for compliance with 2017 NEC it should be mounted within the 

array boundary of the two panels, where the two panels are no greater than 1’ (foot) /30cm apart from each 

other. 

 

The installation locations and modes of PFS-PL and PEFS-ESW are shown below. 

 

 

 

 

 

 

 

 

 

      

       

   

 

 

 

By placing the PEFS-PL in position against the underside of the PV panel (or the surface where the temperature 

needs to be sensed). Once mounted ensure that the PEFS-PL is secure. 

Mounting Method 1 

Mounting Method 2 

Correct and wrong way to install

 

 

Summary of Contents for PEFS-PL Series










Reviews:

No comments

Related manuals for PEFS-PL Series

KAPSCH T600 Operator And Maintenance Manual preview
T600
Brand: KAPSCH Pages: 57
CAE Healthcare Ares User Manual preview
Ares
Brand: CAE Healthcare Pages: 108
made for movement Xplore User Manual preview
Xplore
Brand: made for movement Pages: 51
ICELED MATRIX Installation And Operating Manual preview
MATRIX
Brand: ICELED Pages: 4
FaceLake FL-100 Manual preview
FL-100
Brand: FaceLake Pages: 2
JB-Lighting P18 Operating Instructions Manual preview
P18
Brand: JB-Lighting Pages: 32
TANDBERG Model 5 Service Manual preview
Model 5
Brand: TANDBERG Pages: 23
Laserworld EL-60 G Manual preview
EL-60 G
Brand: Laserworld Pages: 8
Laserworld EL 200 LED User Manual preview
EL 200 LED
Brand: Laserworld Pages: 6
LaserLiner ActivePen Manual preview
ActivePen
Brand: LaserLiner Pages: 56
LaserLiner AC-tiveMaster Operating Instructions Manual preview
AC-tiveMaster
Brand: LaserLiner Pages: 54
Macht Dental POWER CLEAN Operation Instruction Manual preview
POWER CLEAN
Brand: Macht Dental Pages: 8
Raymarine ST70 Instrument Quick Reference Manual preview
ST70 Instrument
Brand: Raymarine Pages: 12
Raven SmarTrax Operation Manual preview
SmarTrax
Brand: Raven Pages: 73
Tascam DA-40 Tehnical Documentation preview
DA-40
Brand: Tascam Pages: 3
RAB Lighting SR2 Installation Instructions preview
SR2
Brand: RAB Lighting Pages: 4
campgo Raiju User Manual preview
Raiju
Brand: campgo Pages: 33
Kelvin Epos 300 User Manual preview
Epos 300
Brand: Kelvin Pages: 30

Brands by name

Popular brands

Load more brands