background image

output voltage is not 0.9V or 1.8V. Replace the rapid shutdown device.
2)  Contact Projoy.

PVRSS work well.

DC voltage of inverter is

abnormal (§5.1.2).

www.projoy-electric.com

13

Projoy Electric Co., Ltd.

Tell: +86-512-6878 6489
Web:  https://en.projoy-electric.com/
Add:  2nd Floor, Building 3, No. 2266, Taiyang Road, Xiangcheng District, Suzhou

8   Contact us

Table 5.2 Troubleshooting

6. Recycling and Disposal

7. Guarantee Service

This device should not be disposed as residential waste. A rapid shutdown device or controller that has reached 
the end of its life and is not required is to be returned to your dealer or you must find an approved collection and 
recycling facility in your area.

Within warranty period of the products, the invoice and date of purchase are required for the service. Besides, the 
trademark on the product should be clearly visible, otherwise warranty is not available. 
The product warranty covers all damage caused by design or production. However, the followings are not covered:
* Beyond the warranty period;
* No valid warranty card and product serial number;
* Damage in transportation;
* Incorrect use, operation and modification;
* Operation in very harsh environment not as described in this manual;
* Out of the scope of installation and use specified in relevant international standards;
* Damage caused by abnormal natural environment.

Panel-level Rapid Shutdown(PLC)

Summary of Contents for PEFS-PL80P-11
















Reviews: