2.2 Safety instructions Caution!
3 Technical Data/Specification and product information
1) Need permission from the local utility prior to connecting the product to the utility grid and hire qualified personnel.
2) Observe all documentation that accompanies the product.
3) Installations maintenance and installed should be carried out by competent persons, who have sufficient skills and
training to apply safe methods of work to install.
4) All electrical installations must be done in accordance with the National Wiring Rules of Standard and local code.
1) Adopt Fire-retardant V-0/UV resistant materials, high temperature resistance, corrosion resistance and security impact
resistance.
2) Snap Joints design, simple and convenient for installation, reduce installation costs.
3) Long lifespan design suitable for 25 years solar system requirement, normally working environment at -30℃~+80℃, cut off
the solar panels automatically once the temperature in excess of 85℃.
4) Real-time monitoring and Optimizing Solar Power Generation, Enhance the power generation volume.
5) The connection cable with UL and TUV qualification, Maximum Output Voltage up to 120Vdc.
6) Optional color: White/orange/black; PLC control method or DC 24V manual control are all available.
7) One rapid shutdown can control 1,2, or 4 solar modules, Suitable for residential and commercial solar systems.
Normal installation of PEFS-PL80S-11/PEFS-PL80S-21 will be the connection of one/two PV panels in series to one RSD unit
(typical wiring example below). Where the combined rating of two panels exceeds the rating of the
PEFS-PL80S-11/PEFS-PL80S-21, or to meet regulatory compliance, 1-to-1 connection of the PV module to the FireRaptor can
be used. See diagram on page 3.Connect the array Positive (+) output connector to the FireRaptor Positive (+) input connec-
tor. Connect the array Negative (-) output connector to the FireRaptor Negative (-) input connector.
3.1 Parameters Table
3.2 Product Information
Model
PEFS
-
PL80S -
11
PEFS
-
PL80S -
2
1
Input:
Max. System Voltage
1000V
1000V
Input Vmax PV (Vdc)
80Vdc
80Vdc
Output Vmax PV (Vdc)
80V
160V
Isc PV (absolute Max.) (A)
20A
20A
Mppt Voltage range (Vdc)
0
-
80V
0-80V
Max. input current(A)
20A
20A
Rapid Shutdown time limit
1S
Initiators
Loss of Power supply
DC input power
24VDC, 0.1A
others
Ingress protection
Type 6P
Temperature (℃ )
-
30
to +80℃
Others
Size (mm)
120*52*22
120*59*22
Environment humidity
0-90%
4 Installation
www.projoy-electric.com
RSD PEFS-PL80S
2
