Montageanleitung /
Installation manual
MBN GmbH
Balthasar-Schaller-Str. 3
86316 Friedberg
Germany
www.proled.com
39
Remote controller:
Press button >> and the next USM identification number will be displayd. If no USM
modul is connected, no number will be displayed.
After the USM module is selected the IR number of the selected module can be
configured. The zones can now be controlled via infrared remote controller or RF
remote controller.
MANUAL MODE
In manual mode the RGB color of every zone can be set. Only one zone color can be
changed at a time. The actual changeable zone color is for the selected zone.
The current RGB colors can be seen on the upper side of the screen in four
rectangular fields.
Zone Selection
On the screen there are the four zone buttons. Touch it to select one zone. The
selected zone button color is highlighted.
Edit zone name: After long touching each zone button the text editor window will
open to edit the zone name.
Color Selection
Color selection modes depend on the type of light working modes. The 1 channel
dimmer mode has only one color selection method, the RGB modes have two
different ones and the 4 and 5 channel modes have 3 different selection modes.
