CROMOSPOT300
22
•
Press UP/DOWN button to select
[SERVICE LOCK]
and press ENTER button.
•
Select
[ON]
or
[OFF]
through the buttons UP/DOWN to enable access to service menu.
To edit the text that appears on the display in standby mode to refer to the following functions:
Display1
•
Press the button MENU so many times until the display shows
[SERVICE]
, then press the button ENTER.
•
Select in submenu
[CONTENT]
and press ENTER button to confirm the choice.
•
Press UP/DOWN button to select
[DISPLAY1]
and press ENTER button.
•
Edit first line of display content with UP/DOWN button. To move forward, the next letter, press
ENTER button; to turn back, instead, press MENU button.
Send display content
•
Press the button MENU so many times until the display shows
[SERVICE]
, then press the button ENTER.
•
Select in submenu
[CONTENT]
and press ENTER button to confirm the choice.
•
Press UP/DOWN button to select
[SEND]
in order to transfer display content to all fixtures currently
connected via data cable.
3.17 FIXTURE INFORMATION
•
Press the button MENU so many times until the display shows
[SERVICE]
, and press the button ENTER to
confirm.
•
Select in submenu
[NFO]
and press ENTER button. The display will show the installed software version.
•
Press the MENU button to go back or wait some seconds for automatic exit from the menu.
Summary of Contents for Cromospot300
Page 1: ...EN IT Manuale Utente User Manual CROMOSPOT300 MOVING HEAD MENU ENTER UP DOWN 001 P1...
Page 29: ......
Page 59: ......
