ProLights BATWASHIR, User Manual

bATwASHiR

2

WARNING! Before carrying out any operations with the unit, carefully read this instruction 

manual and keep it with cure for future reference. It contains important information about 

the installation, usage and maintenance of the unit.

SAFETY

General instruction

•  The products referred to in this manual conform to the European Community Directives and are there-

fore marked with  .

•  The unit is supplied with hazardous voltage. Leave servicing to skilled personnel only. Never make any 

modifications on the unit not described in this instruction manual, otherwise you will risk an electric 

shock.

•  This device falls under PROTECTION CLASS III. It has to be always operated with an appropriate trans-

former. From time to time check the device, the power cord and transformer. Make sure that the trans-

former is the correct type, the one stated on the rear panel.

•  The connection to the main network of electric distribution must be carried out by a qualified electrical 

installer. Check that the main frequency and voltage correspond to those for which the unit is designed 

as given on the electrical data label. 

•  This unit is not for home use, only professional applications.

•  Never use the fixture under the following conditions:

- in places subject to excessive humidity

- in places subject to vibrations or bumps;

- in places with a temperature of over 40°C or less than 2°C.

•  Make certain that no inflammable liquids, water or metal objects enter the fixture.

•  Do not dismantle or modify the fixture.

•  All work must always be carried out by qualified technical personnel. Contact the nearest sales point for 

an inspection or contact the manufacturer directly.

•  If the unit is to be put out of operation definitively, take it to a local recycling 

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

•  Before starting any maintenance work or cleaning the projector, cut off power from the main supply.

•  The unit for indoor use only. To prevent or reduce the risk of electrical shock or fire, do not expose the 

unit to rain or moisture.

•  Do not install the fixture near sources of heat.

•  When cleaning the fixture, please do not use solvents such as acetone or alcohol, since they may dam-

age the of the unit outer finish and the printings on the panels

•  If this device will be operated in any way different to the one described in this manual, it may suffer 

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like 

short circuit, burns, electric shock, etc.