CROMOWASH100
14
Example 9 DMX channels configuration (BASIC mode):
Number of
DMX channels
Start address
(example)
Used DMX
addresses
Next possible start
address for unit No.1
Next possible start
address for unit No.2
Next possible start
address for unit No.3
9
33
33-41
42
51
60
12
33
33-44
45
57
69
3.11 ADJUSTING THE START ADDRESS
To able to operate the CROMOWASH100 with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the CROMOWASH100. The other functions of the light effect panel
are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
•
Press the MENU button and select, via the directional buttons, the [
Intro
] menu choice, then press the
ENTER button to confirm the choice.
•
Press the UP and DOWN buttons to select [
Address
] menu voice and confirm the choice by pressing the
ENTER button.
•
Edit the DMX address value into the [
1 - 512
] range using the UP and DOWN buttons.
DMX512 Controller
DMX Address: 33
DMX Address: 60
DMX Address: 51
DMX Address: 42
. . . . . . . . . . . .
Fig.7
Summary of Contents for Cromowash100
