15
ECLIPSEFS
3.12 SETUP
You can change the parameters for the device by following these steps:
Temperature
Through the
Max Temperature
function can be displayed the temperature inside the fixture, near the lamp.
• Press the MODE button so many times until the display shows
SETUP
, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select
Temperature
and press the ENTER
button.
• Press UP/DOWN to scroll through the menu, and then select one of the following settings:
-
Temperature °C/°F
- To choose the desired temperature unit:
Fahrenheit
/
Celsius.
-
Max Temperature
- To display the maximum temperature inside the fixture, near the lamp.
• Press the ENTER button to confirm your choice.
• Press the MODE button to go back or to meet the waiting time to exit the setup menu.
Screen
You can change the following parameters related to the display, following the same procedure:
• Press the button MODE so many times until the display shows
SETUP
, then press the button ENTER.
• Select
Screen
through the buttons UP/DOWN, then press the button ENTER.
• Press UP/DOWN to scroll through the menu, and then select one of the following settings for the dis-
play and press the ENTER key to display it.
-
Back Light
- Backlight display Auto Off. This feature allows you to automatically turn off the backlight
after a specified time that you can set using the arrow buttons. To have the display or set a value of
Off~99 min
to turn off the display after the amount of time you choose.
-
Flip Display
- Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select
Yes
to activate or
No
to dis-
able this function.
• Press the ENTER button to confirm your choice.
• Press the MODE button repeatedly to exit the menu and save changes.
Fixture
You can change the parameters for the device by following these steps:
• Press the button MODE to enter the menu mode.
• Press UP/DOWN button to select the
SETUP
. Press the ENTER button to confirm.
• Press UP/DOWN button to select the desired option and press the ENTER button to confirm:
-
Fan Mode
- Fan Speed. Select the fan speed (
Auto Speed /High Speed
) using the UP / DOWN button.
-
Hibernation
- To set the hibernation of the fixture (
Disable/Min(1~99
) using the UP / DOWN button.
-
LED Frequency
- To adjust the frequency of the LEDs. Select the frequency (
600Hz - 1200Hz - 2000Hz - 4000Hz
- 25kHz
) using the UP / DOWN.
-
Theatre
- To set the theatre mode. Select
Yes
to activate,
No
to deactivate.
• Press the ENTER button to confirm your choice.
• Press the MODE button repeatedly to exit the menu and save changes.
3.13 ADVANCED
To enter in advanced functions mode, proceed as follows:
Dimmer
• Press the button MODE so many times until the display shows
ADVANCED
, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select
Dim curve
and press the ENTER but-
