ProLights ECLIPSEFS, User Manual

ECLIPSEFS

16

ton

•  Press the button UP/DOWN to select 

Dimmer1 - Dimmer2 - Dimmer3 - Dimmer4.

•  Press ENTER button to store.

•  Press the MODE button to go back or to meet the waiting time to exit the setup menu.  

Halogen

•  You can set the 

Halogen

 mode thought this section.

•  Press the button MODE to enter the menu mode.

•  Press UP/DOWN button to select the 

ADVANCED

. Press the ENTER button to confirm.

•  Press UP/DOWN button to select the desired option and press the ENTER button to confirm:

-

HB Mode 

- To set the 

HB

 mode (High Brightness Mode, with the maximum value of the colors)

-

Studio Mode -  

To set a automatic white balance.

•  Press ENTER button to store.

•  Press the MODE button to go back or to meet the waiting time to exit the setup menu. 

Calibration

Select this function to calibrate and adjust code and channel:

•  Press the button MODE so many times until the display shows 

ADVANCED

, then press the button ENTER.

•  Press the UP/DOWN button to scroll through the menu, then select 

Calibration

 and press the ENTER 

button.

•  Enter the password “050”.

•  Use the UP/DOWN button to select the option proposed 

(Code/CHxx)

 and press the ENTER  button to 

confirm the setting.

•  Press the MODE button to go back and save changes.

3.14 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:

•  Press the button MODE so many times until the display shows 

INFORMATION

, then press the button EN-

TER.

•  Press the UP/DOWN button to scroll through the menu, then select one of the following information 

and press the ENTER button to display it.

 -

Time Info.

 - Through the Time Info function you can display the operating time of the projector.

 -

Temperature

 - Through the Temperature function can be displayed the temperature of sensor.

 -

Software Version

 - Through Software Version function you can display the currently installed software 

version.

•  Press the MODE button to exit the menu.

3.15 RELOAD DEFAULT

Select this function to reload all info:

•  Press the button MODE so many times until the display shows 

DEFAULT

, then press the button ENTER.

•  Use the UP/DOWN button to select the option proposed 

(Basic Reload/Program Reload/Private Reload/ All 

Reload)

 and press the ENTER  button to confirm the setting.

•  Press the UP/DOWN button to select 

On

 or 

Off

, then press the ENTER button to confirm.

•  Press the MODE button to go back or to meet the waiting time to exit the setup menu.