GHOST GH080F
10
2.9 MANUAL FUNCTION
When the LCD panel display “READY TO FAZER”, keep pressing MANUAL button can force machine gener-
ate 100% full fog output. As soon as releasing MANUAL button, machine stops fogging immediately.
2.10 FAN SPEED FUNCTION
When the LCD panel display “READY TO FAZER”, press the FUNCTION button and select
FAN SPEED
function.
Under this mode, user can use either the UP/DOWN button to adjust the speed of fan (range from 20% to
100%).
2.10 AIR PUMP SENSOR
There is an air pump sensor inside GHOST GH080F. Keep pressing MANUAL button and power on GH080F
machine, until LCD screen indicates “AIRPUMP SENSOR ON”. At this point, use UP/DOWN buttons to switch
this sensor on or off.
NOTE - The sensor is a very important protection device. Under normal operation mode, please assure
the sensor is activated on. After above setting is completed, press VOLUME button can memorize the final
setting and leave setting mode.
2.10 POWER OFF MODE
When the LCD panel display “READY TO FAZER”, press the MANUAL button for 3 seconds to turn off the
machine. If the machine is switched off this way, the display will start to count down for 3 minutes. After-
wards, the machine will discontinue to warm up and the fan operation and the air pump will stop. The
diplay indicates Power Off.
NOTE
•
During the 3-minute count down, the machine is in Power Off mode, pressing the button VOLUME can
reactivate the unit and make heater and fan work. However, the air pump will not resume working.
•
If the machine is controlled by DMX, disconnecting the DMX connection causes the unit to enter the
Power Off mode and it will start to count down 3 minutes to shutdown.
