ProLights PARCOLOR56, User Manual

9

PARCOLOR56

3.7 DMX control

Channel 

Function in the 6 channel mode

DMX 

value

1

Red

000-255

2

Green

000-255

3

Blue

000-255

4

MACRO

Off

On

000-007

008-255

5

SPEED/STROBE

Off

Strobe

000-015

016-255

6

OPERATION MACRO MODE CHANNEL 4

Dimmer

Decreasing brightness

Increasing brightness

Decreasing brightness then increasing brightness 

Auto color mix

3-color flash

7-color flash

Sound control

000-031

032-063

064-095

096-127

128-159

160-191

192-223

224-255

- 4 -  MAINTENANCE

4.1 Cleaning the unit and maintenance

• 

Make sure the area below the installation place is free from unwanted persons during setup.

• 

Switch off the unit, unplug the main cable and wait until the unit has cooled down.

• 

All screws used for installing the device and any of its parts should be tightly fastened and should not 

be corroded.

• 

Housings, fixations and installation spots (ceiling, trusses, suspensions) should be totally free from any 

deformation.

• 

The main cables must be in impeccable condition and should be replaced immediately even when a 

small problem is detected.

• 

In order to protect the device from overheating the ventilation openings should be cleaned monthly.

• 

The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.

• 

It  is  recommended  to  clean  the  protection  lens  at  regular  intervals,  from  impurities  caused  by  dust, 

smoke, or other particles to ensure that the light is radiated at maximum brightness. For cleaning, dis-

connect the main plug from the socket. Use a soft, clean cloth moistened with a mild detergent. Then 

carefully wipe the protection lens dry. For cleaning other housing parts use only a soft, clean cloth. Never 

use a liquid, it might penetrate the unit and cause damage to it.

Warning: we strongly recommend internal cleaning to be carried out by qualified personnel!