11
SMARTbAT
3.8 SOUND MODE
To set the sound mode refer to the following steps:
• Press the MENU button so many times until the display shows [
Snd].
• Press the ENTER button for save the setting.
3.9 MICROPHONE SENSITIVITY
To set the microphone sensitivity refer to the following steps:
• Press the button MENU so many times until shows [
Sens].
• Using UP/DOWN button, select one of the programs [
u1 - u100].
• Press the button ENTER save the setting.
3.10 MANUAL COLOR
This mode allows to combine the colors red, green, blue and white
(r, g, b)
.
• Press the button MENU so many times until the display shows
[U--]
, then press the button ENTER.
• Select the color
(r, g, b)
through the buttons UP/DOWN.
• Press the button ENTER to confirm.
• Using UP/DOWN button, select the desired color value
[000 - 255]
.
• Press ENTER button to continue to the next color.
• Continue until the desired mix is obtained.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.11 IR SETUP
To start up the IR recevitor refer to the following steps:
• Press the MENU button so many times until the display shows [
Set].
• Press the ENTER button to confirm.
• Press the UP/DOWN button, select one of the programs [
ON]
or
[OFF].
• Press the ENTER button for save the setting.
NOTE - Make sure to point the controller directly at the receiver on the product.
Fig.7
IRC REMOTE
BLACK
OUT
AUTO
STROBE
SPEED
SOUND
SENSI-
TIVITY
%
MANUAL
FADE
SNAP
R
G
B
+
0
1
2
3
4
5
6
7
8
9
A
UV
W
Summary of Contents for SMARTBAT
Page 1: ...MANUALE UTENTE USER MANUAL SMARTBAT IT EN portable battery powered UPLIGHTER ...
Page 21: ......
Page 43: ......
