SPLiTTER4WRK
2
SAFETY
General instruction
•
The products referred to in this manual conform to the European Community Directives and are therefore
marked with .
•
The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only. Never
make any modifications on the unit not described in this instruction manual, otherwise you will risk an elec-
tric shock.
•
Connection must be made to a power supply system fitted with efficient earthing (Class I appliance accord-
ing to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units from indi-
rect contact and/or shorting to earth by using appropriately sized residual current devices.
•
The connection to the main network of electric distribution must be carried out by a qualified electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed as
given on the electrical data label.
•
This unit is not for home use, only professional applications.
•
Never use the fixture under the following conditions:
- in places subject to excessive humidity;
- in places subject to vibrations or bumps;
- in places with a temperature of over 45 °C.
•
Make certain that no inflammable liquids, water or metal objects enter the fixture.
•
Do not dismantle or modify the fixture.
•
All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an
inspection or contact the manufacturer directly.
•
If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
•
Before starting any maintenance work or cleaning of the unit, cut off power from the main supply.
•
Do not install the fixture near sources of heat.
•
If this device will be operated in any way different to the one described in this manual, it may suffer damages
and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short circuit,
burns, electric shock, etc.
GENERAL INFORMATION
Shipments and claims
The goods are sold “ex works” and always travel at the risk and danger of the distributor. Eventual damage will
have to be claimed to the freight forwarder. Any claim for broken packs will have to be forwarded within 8 days
from the reception of the goods.
Warranty and returns
The guarantee covers the fixture in compliance with existing regulations. You can find the full version of the
“General Guarantee Conditions” on our web site www.musiclights.it. Please remember to register the piece of
equipment soon after you purchase it, logging on www.musiclights.it. The product can be also registered filling
in and sending the form available on your guarantee certificate. For all purposes, the validity of the guarantee is
endorsed solely on presentation of the guarantee certificate. Music & Lights will verify the validity of the claim
through examination of the defect in relation to proper use and the actual validity of the guarantee. Music &
Lights will eventually provide replacement or repair of the products declining, however, any obligation of com-
pensation for direct or indirect damage resulting from faultiness.
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
Summary of Contents for SPLITTER4WRK
