ProLights TRIBE MINIRUBY, User Manual

11

MINIRUBY

•  Press the ENTER button to confirm your choice.

•  Press the MODE/ESC button repeatedly to exit the menu and save changes.

The unit will go into automatic mode by executing the program automatically.

Music mode - 

[MUSIC CONTROL]

 -

•  In 

MUSIC CONTROL 

mode, via its integrated microphone, the unit can be controlled by music with a 

clear rhythm in the bass range. If the music control should not work optimally, increase the volume 

or reduce the distance between the sound source and the light effect unit.

•  Use UP/DOWN  button to select 

Master - Alone - 

.

•  Press ENTER button to confirm the selection.

3.5 SENSITIVITY MICROPHONE

Select this function to set the value of the sensitivity of the microphone for use with a music control:

•  Press the MODE button to access the main menu.

•  Press the UP/DOWN button to scroll the menu, select the 

Set 

icon, then press the ENTER button to enter 

the next menu.

•  Press the UP/DOWN button to scroll through the menu, select 

UI Set

, and press the ENTER button to 

enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, then select 

Mic Sens.

 and press ENTER to confirm.

•  Press the UP/DOWN button to adjust the level of sensitivity of the microphone, and then press the 

ENTER button to confirm your choice.

•  Press the MODE button repeatedly to exit the menu and save changes.

3.6 LINKING

Several units may be interconnected in order to control all further slave units to the same effect of the 

master unit.

5.  Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN  of the first slave unit.

6.  Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units 

are connected in a chain.

3.7 DMX CONFIGURATION

The MINIRUBY has 5 DMX channel configurations which can be accessed from the control panel.

•  Press the MODE button to access the main menu.

•  Press the UP/DOWN button to scroll the menu, select the 

Set 

icon, then press the ENTER button to enter 

the next menu.

•  Press the UP/DOWN button to scroll through the menu, select 

Users

 and press the ENTER button to 

enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, select 

User Mode

 and press ENTER to confirm 

your choice.

•  Use the UP/DOWN button to select the desired DMX channel configuration (

Standard, Basic

), then press 

the ENTER button to confirm your choice.

•  Press the MODE button repeatedly to exit the menu and save changes.

3.8 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sufficient connect the controller to MINIRUBY. 

To able to operate the MINIRUBY with a light controller, adjust the DMX start address for the first a DMX 

channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-

nel, adjust the start address 33 on the MINIRUBY. The other functions of the light effect panel are then 

automatically assigned to the following addresses.

An example with the start address 33 is shown below: