ProLights TRIBE MINIRUBY, User Manual

15

MINIRUBY

3.12 FIXTURE SETTINGS

You can change the parameters for the device by following these steps:

•  Press the MODE/ESC button to access the main menu.

•  Press the UP/DOWN button to scroll the menu, select the 

Set

 icon, then press the ENTER button to enter 

the next menu.

•  Press the UP/DOWN button to scroll through the menu, then select 

Movement

 and press the ENTER but-

ton to enter the next menu.

•  Use the UP/DOWN button to select the option proposed and press the ENTER  button to confirm the 

setting.

 -

Pan Reverse 

- Pan rotation in the opposite direction. Select OFF to deactivate the function (normal 

setting); ON to activate the function (Pan Reverse).

 -

Tilt Reverse - 

Used for reversing tilt movement. Select OFF to deactivate the function (normal setting); 

ON to activate the function (Tilt Reverse).

 -

Pan Degree - 

Angle of Pan. Select 540° or 630° to set the maximum angle of rotation of the moving 

head.

 -

Encoders - 

Reorganization Pan/Tilt position after rolling away. Select OFF to deactivate or ON to ac-

tivate the function.

 -

MOVE Mode - 

Type of movement of the moving head. Select Standard to obtain a fast and fluid move-

ment of Pan/Tilt, Smooth for a slower and softer movement of Pan/Tilt.

•  Press the ENTER button to confirm your choice.

•  Press the MODE/ESC button repeatedly to exit the menu and save changes.

3.13 LAMP SETTINGS

You can change the parameters of the device lamp by following these steps:

•  Press the MODE/ESC button to access the main menu.

•  Press the UP/DOWN button to scroll the menu, select the Lights icon, then press the ENTER button to 

enter the next menu.

•  Press UP/DOWN to scroll through the menu, select one of the following settings and press the ENTER 

button to display it.

 -

Turn On/Off 

- Turn on/off the lamp. Select  On/Off, press ENTER button to confirm, present mode will 

blink on the display, use UP/DOWN button to select On (lamp on) or Off (lamp off), press ENTER 

button to store.

 -

Automatic 

- Lamp state while power on. Use UP/DOWN button to select On (Lamp on while power 

on) or Off (Lamp off while power on), press ENTER button to store.

 -

DMX Control 

- Turn off the unit via DMX controller. Use UP/DOWN button to select Off (turn off the 

unit via DMX controller available) or On (turn off the unit via DMX controller impracticable), press 

ENTER button to store.

 -

Max Temperature 

- Temperature operating limits. This function allows you to set the maximum tem-

perature inside the projector, after which the lamp will automatically turn off. Press the arrow but-

tons to set the desired temperature (80° -139°). Temperatures of less than 90° C are not critical. We 

recommend that you enable this feature for temperatures higher than 90°.

 -

Lamp Adjust - 

Adjusts the lamp. This function allows you to modify all the parameters of the lamp: 

Control, Pan, Pan Fine,

Tilt, Tilt Fine, Pan&Tilt Speed,  Shutter,  Color, Prism

. Press the UP/DOWN button to 

select one of the parameters and press ENTER to edit the value (000-255) through the UP/DOWN 

button.

•  Press the ENTER button to confirm your choice.

•  Press the MODE/ESC button repeatedly to exit the menu and save changes.