ProLights TRIBE MINIRUBY, User Manual

17

MINIRUBY

3.17 SPECIAL FUNCTIONS

For the MINIRUBY you can access the following special functions:

No Signal

Select this feature to set the preferred mode of operation to be activated in case the drive is not present 

no DMX signal input:

•  Press the MODE/ESC button to access the main menu.

•  Press the UP/DOWN button to scroll the menu, select the 

Set

 icon, then press the ENTER button to enter 

the next menu.

•  Press the UP/DOWN button to scroll through the menu, select 

UI Set

, and press the ENTER button to 

enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, then select 

No Signal

 and press ENTER to con-

firm.

•  Press the UP/DOWN button to select the preferred mode of operation: 

Close/Hold/Auto/Music

.

•  Press the ENTER button to confirm your choice.

•  Press the MODE/ESC button repeatedly to exit the menu and save changes.

Fans Mode

Select this function to set the fans operation mode:

•  Press the MODE/ESC button to access the main menu.

•  Press the UP/DOWN button to scroll the menu, select the 

Set

 icon, then press the ENTER button to enter 

the next menu.

•  Press the UP/DOWN button to scroll through the menu, select 

UI Set

, and press the ENTER button to 

enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, and then select 

Fans Mode

 and press ENTER to 

confirm.

•  Press the UP/DOWN button to select 

Auto Speed /High Speed

  , press the ENTER button to confirm your 

choice.

•  Press the MODE/ESC button repeatedly to exit the menu and save changes.

Hibernation

Select this function to activate the standby mode. This function will be activated automatically after a 

period of inactivity, which is defined by the user. In standby mode, the lamp and all engines will not be 

fed if no signal is sent. The unit will automatically reset and will return to operation as soon as the DMX 

signal is sent.

•  Press the ENTER button to access the main menu.

•  Press the UP/DOWN button to scroll through the menu, select the 

Set

 icon, then press the ENTER button 

to enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, select 

UI Set

, and press the ENTER button to 

enter the next menu.

•  Press the UP/DOWN to scroll through the menu, select 

Hibernation

 and press ENTER to confirm.

•  Select the desired time through the arrow keys or select 

Not Hibernation

 to disable this function, then 

press the ENTER button to confirm your choice.

•  Press the MODE/ESC button repeatedly to exit the menu and save changes.

Fixture ID and RDM

With this function you can call up various submenus via RDM.

This device is RDM ready. RDM stands for “Remote Device Management” and makes remote control of 

devices connected to the DMX-bus possible. Manual settings like adjusting the DMX starting address are 

no longer needed. This is especially useful when the device is installed in a remote area. RDM is integrated