ProLights TRIBE MINIRUBY, User Manual

MINIRUBY

18

in DMX without influencing the connections. The RDM-data is transmitted via the standard XLR-poles 1 

and 2 – new DMX-cables are not necessary. RDM ready and conventional DMX devices can be operated 

in one DMX line. The RDM protocol sends own packages in the DMX512 data feed and does not influence 

conventional devices. If DMX splitters are used and RDM control is to be used, these splitters must sup-

port RDM. The number and type of RDM parameters depend on the RDM controller (not included) is used.

•  Press the MODE/ESC button to access the main menu.

•  Press the UP/DOWN button to scroll the menu, select the 

Set

 icon, then press the ENTER button to enter 

the next menu.

•  Press the UP/DOWN button to scroll through the menu, and then select the 

Fixture ID

 and press the 

ENTER button to enter the next menu.

•  Press UP/DOWN button to scroll through the menu, then select 

Password

 and press ENTER to confirm.

•  Use the arrow keys to enter the password 

050

 and press ENTER to confirm.

•  Once you have entered your password, you can set the 

PID Code

, necessary to control the unit with the 

RDM protocol. Press the UP/DOWN button to scroll through the menu, select PID Code and press EN-

TER to confirm.

•  Use the arrow keys to enter the PID Code, then press the ENTER button to confirm your choice.

•  Press the MODE/ESC button repeatedly to exit the menu and save changes.

Calibration

Select this function to calibrate and adjust the wheels of the effects in their correct positions:

•  Press the MODE/ESC button to access the main menu.

•  Press the UP/DOWN button keys to scroll the menu, select the 

Set

 icon, then press the ENTER button to 

enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, then select 

Calibration

 and press the ENTER but-

ton to enter the next menu.

•  Press the UP/DOWN button to scroll through the menu, then select 

Password

 and press ENTER to con-

firm.

•  Use the arrow keys to enter the password 050 and press ENTER to confirm.

•  Once you have entered your password, you can set the values   for 

Pan, Tilt, Color, Prism

. Press the UP/

DOWN button to scroll through the menu, select one of the functions mentioned above and press 

ENTER to confirm your choice.

•  Use the arrow buttons to enter the desired value, then press the ENTER button to confirm your choice.

•  Press the MODE/ESC button repeatedly to exit the menu and save changes.

Reload Default

Select this function to reset the unit to factory settings:

•  Press the MODE/ESC button to access the main menu.

•  Press the UP/DOWN button to scroll the menu, select the 

Set

 icon, then press the ENTER button to enter 

the next menu.

•  Press the UP/DOWN button to scroll through the menu, select 

Reload Default

 and press the ENTER button 

to enter the next menu.

•  Press the UP/DOWN button to select the favourite recovery mode 

Basic  Reload/Program  Reload/  Private 

Reload/All Reload

, then press the ENTER button to confirm.

•  Press the UP/DOWN button to select 

ON

 or 

OFF

, then press the ENTER button to confirm.