8
Replacing the charcoal filters
The hood is supplied with 2 active charcoal filters
that trap cooking grease particles.
The saturation of the charcoal filter occurs after
more or less prolonged use, depending on the
type of cooking and how often you clean the
grease filters. In any case, it is necessary to replace
the filter at least every four months.
The charcoal filters may NOT be washed or
regenerated.
To access the charcoal filters, remove the grease
filter and then the frame by pulling on both sides.
Place the charcoal filters on the motor outlets, and turn each charcoal filter’s wheel clockwise until the
filter locks in place.
Replacing lamps
Disconnect the appliance from the mains. To access the lamp housing, you need to remove the cover
first.
Warning!
Prior to touching the light bulbs, ensure they are cooled down.
Replace the old light bulb with the one of the same type: use Ø35mm E14 28W halogen candle lamps
only.
If the lights do not work, make sure that the lamps are fitted properly into their housings before you call
for technical assistance.
Downloaded from www.vandenborre.be
