Quick Installation Guide
PROLiNK Hurricane 9300G
Wireless 802.11g ADSL2+ Ethernet Modem Router
Revision 1.0.1
Package Contents
1. 1 x ADSL2+ Ethernet Modem
802.11g Router
2. 1 x RJ-45 straight cable
3. 1 x RJ-11 DSL cable
4. 1 x Power Adaptor
5. 1 x CD
6. Quick Installation Guide
7. 1 x Antenna
Minimum System Requirement
Technical Support Information
•
Windows 98SE/ME/ 2000/XP
•
MAC 9.x to 10.x
•
64 MB RAM for Win 98Se/ Me
•
128 MB RAM for Win 2K/ XP
•
64MB or 128MB RAM for Mac
•
4x speed CDROM Drive
•
Ethernet Port (LAN Card)
Tel: (65) 6296 5455
9am—5:45pm (Mon--Fri)
9am--1pm (Sat)
Email:
support@fida.com
Address:
Blk 105 Boon Keng Road #06-11/13
Kallang Basin Industrial Estate
Singapore 339776
Step 1
Hardware Connection
1.1 Ensure that the PC/Notebook & ADSL Modem are power off
1.2 Connect one end of the RJ45 (Ethernet) cable to the LAN port of the
computer.
1.3 Connect the other end of RJ45 cable to the ADSL Modem.
1.4 Connect one end of RJ11 (Telephone) cable to the ADSL port (marked
Line) on the ADSL Modem.
1.5 Connect the other end of RJ11 cable into the phone socket, which has
the ADSL service activated, or the ADSL port of a Micro-filter whichever
is applicable
1.6 Connect power adapter to the power socket and switch-on H9300G
1.7 PROLiNK WG1000 Wireless LAN adapter may be installed into your
notebook computer when you reach Step 3b
1.8 Note: Console port is used for troubleshooting purposes by authorized
service personnel only
Step 2
Configuring the Computer / Notebook
Important!
Please ensure that the PC’s Network Card TCP/IP Properties and the
Internet Browser proxy are configured
It is also assumed that the computer/notebook has the Ethernet Network card
installed.
Note:
In case you have static IP address and you need to use this value for other
network connections, make sure you write down the value first before changing
to
Obtain an IP address automatically
2.1a Configure TCP/IP settings for Windows® 98SE / ME
•
Windows Desktop > right click
Network Neighborhood
for Wins 98SE /
Network Places
for Win ME > select
Properties
•
“Network” window > click the
Configuration
tab > scroll down to select
and double click
TCP/IP > xxx
where
xxx
refers to the model of the
Ethernet Network Card connected to the ADSL Ethernet Modem
•
“TCP/IP Properties” window > select
IP Address
tab > select
Obtain an IP
address automatically
> click
DNS Configuration
tab > click
Disable
DNS
> click
OK
Take note that the system prompts to
Restart
the Computer
2.1b Configure TCP/IP settings for Windows® 2000 / XP
•
Windows Desktop > right click
Network Places
> select
Properties
•
“
Network & Dial-Up Connection
” window
> click
Local Area Connection
> scroll down to select and double click
Internet Protocol TCP/IP
•
“Internet Protocol (TCP/IP) Properties” > select
Obtain an IP address
automatically
> select
Obtain DNS server address automatically
> click
OK
2.2 Disable Proxy Settings
•
Windows Desktop > right click
Internet Explorer (IE)
> click
Properties
•
“Internet Properties” window > click
Connections
tab > select
Never dial a
connection
> click
LAN Settings…
•
“Local Area Network (LAN) Settings” window > remove the
tick
for the
option for the Automatic configuration > remove the
tick
for option box for
Proxy server > click
OK
> click
OK
again to exit from “Internet Properties”
window
Step 3
Configuring H9300G
3a
Through Ethernet LAN connection
a Start your Web Browser > key in
http://192.168.1.254
at the URL/Address
bar
b Key in the User name:
admin
and Password:
admin
> click on the
OK
button
c Click on
Quick Start
> Select the
Encapsulation
and enter the
VPI/VCI
settings of your ISP
•
key in your Username: e.g.
prolink@singnet
and Password:
********
(provided by your ISP)
•
click
Apply
to complete the setup
(For reference - VPI/VCI: Singapore= 0/100, Malaysia= 0/35, Indonesia=1/33,
Sri Lanka= 8/35, Thailand= 1/32)
d Click
OK
e Click on
Save Config
f Click
Apply
Wall
phone socket
Micro
Filter
Power
Adapter
Wireless LAN
adapter
Computer
H9300G
Telephone
(optional)
