ProLinx 6201-WA-DFNT to DFNT Setup Manual Download | Manualshive

Page: 38 / 45

background image

6201-WA-DFNT

♦

ProLinx Wireless

Support, Service & Warranty

High Speed Wireless EtherNet/IP Gateway

Page 38 of 45

ProSoft Technology, Inc.

August 12, 2008

North America/Latin America (excluding Brasil) (location in California)

+1.661.716.5100, support@prosoft-technology.com (mailto:support@prosoft-
technology.com)

Languages spoken include: English, Spanish

For technical support calls within the United States, an after-

hours

answering

system allows pager access to one of our qualified technical and/or application
support engineers at any time to answer your questions.

Brasil (location in Sao Paulo)

+55-11-5084-5178 , eduardo@prosoft-technology.com (mailto:eduardo@prosoft-
technology.com)

Languages spoken include: Portuguese, English

7.2 Return

Material

Authorization (RMA) Policies and Conditions

The following RMA Policies and Conditions (collectively, "RMA Policies") apply to
any returned Product. These RMA Policies are subject to change by ProSoft
without notice. For warranty information, see "Limited Warranty". In the event of
any inconsistency between the RMA Policies and the Warranty, the Warranty
shall govern.

7.2.1 All Product Returns:

a) In order to return a Product for repair, exchange or otherwise, the

Customer must obtain a Returned Material Authorization (RMA) number
from ProSoft and comply with ProSoft shipping instructions.

b) In the event that the Customer experiences a problem with the Product for

any reason, Customer should contact ProSoft Technical Support at one of
the telephone numbers listed above (page 37). A Technical Support
Engineer will request that you perform several tests in an attempt to
isolate the problem. If after completing these tests, the Product is found to
be the source of the problem, we will issue an RMA.

c) All returned Products must be shipped freight prepaid, in the original

shipping container or equivalent, to the location specified by ProSoft, and
be accompanied by proof of purchase and receipt date. The RMA number
is to be prominently marked on the outside of the shipping box. Customer
agrees to insure the Product or assume the risk of loss or damage in
transit. Products shipped to ProSoft using a shipment method other than
that specified by ProSoft or shipped without an RMA number will be
returned to the Customer, freight collect. Contact ProSoft Technical
Support for further information.

d) A 10% restocking fee applies to all warranty credit returns whereby a

Customer has an application change, ordered too many, does not need,
etc.

«
...
36
37
38
39
40
...
»

Summary of Contents for 6201-WA-DFNT to DFNT














































Reviews:

No comments

Related manuals for 6201-WA-DFNT to DFNT

Brand: QTS Pages: 62

MicroTrac Gateway

Brand: YASKAWA Pages: 33

Brand: Digi Pages: 6

Brand: Esse-ti Pages: 56

Brand: ZyXEL Communications Pages: 2

Brand: PheeNet Pages: 14

Brand: Aaeon Pages: 71

Brand: ProSoft Technology Pages: 104

Brand: VOPtel Pages: 38

Brand: Gardena Pages: 2

Brand: Planet Networking & Communication Pages: 73

Brand: ZyXEL Communications Pages: 2

Brand: OWL Pages: 16

Brand: Swegon Pages: 14

Brand: PiiGAB Pages: 48

Druid D2 Series

Brand: Nemtek Pages: 6

Brand: molex Pages: 3

Brand: RTA Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands