Starting Up
Programming the Appliance
1. Unlock and open the door.
2. Turn on the power by pressing the ON/OFF button in the upper left corner of the
control panel.
3. Set the Clock.
• Turn the dial to Set Clock. The day-of-the-week icon will blink.
• Adjust the day forward or backward using the +/– buttons on the right side of the
control panel. AM or PM is indicated on the lower right side of the time digits.
• Press the Set button on the lower left corner of the LCD display. The time will blink.
• Adjust the time forward or backward using the +/– buttons on the right side of the
control panel. AM or PM is indicated on the lower right side of the time digits.
4. 24/7 Mode.
• If you want Air/Q
™
550 to run continuously — 7 days a week, 24 hours a day
— turn the dial to Run 24/7. If not, skip to Step 5.
• You can adjust the fragrance intensity level (1 to 50) using the +/- buttons.
Refer to Selecting Scent Intensity for the intensity level to set.
5. Set Multi-Program Timer.
• Turn the dial to Set Program. The Program icon comes on.
• The day-of-week icons will all blink, indicating you are selecting all days with
the same program. If you want to program a specific day, use the +/- buttons
to select the day. You can set maximum of 3 on/off programs same for every
day or individually for each day. After selecting the day, press the Set button
to advance.
20
