12
English
Multiple display mode
1. Press [
▲
CHANNEL ] until channel 1 flashes in the display. The readings
from all connected sensors will now appear in turn.
2. Press [
▲
CHANNEL ] again to only show readings from channel 1.
Care and maintenance
Clean the weather station using a lightly moistened cloth.
Only use mild cleaning agents, never solvents or corrosive chemicals.
Troubleshooting guide
The weather station
doesn’t work.
The display doesn’t
come on.
• Make sure that the mains adaptor and its lead
are undamaged and securely connected both
to a wall socket and the weather station.
• Check that the wall socket is live.
Incorrect or
unreadable values
on the display.
Press [ RESET ] (20) on the back of
the weather station.
No readings from
the connected
sensors are shown.
The display shows
“---”.
• Try moving the sensors to a different location.
• Make sure the sensor is set to the correct
channel and that its batteries are not flat.
• Press [ RESET ] on the front of the sensor.
• Follow the instructions listed in the
Quick
start
section or in the
Connecting 2 additional
outdoor sensors
section above.
The display shows
“HH.H/LL.L”.
• The measured temperature lies
outside the weather station’s range.
See the
Specifications
section below.
Summary of Contents for IW006-DCF
Page 63: ......
