9
English
Setting alarms 1 and 2
1. Press [ SET/AL SET ] once until “A1” and “06:00” begin flashing.
2. Hold in [ SET/AL SET ] for about 2 seconds until the hour display begins
flashing. Press [
▲
CHANNEL ] or [
▼
ºC/ºF WAVE ] to set the desired hour.
3. Press [ SET/AL SET ] again until the minutes display begins to flash.
Press [
▲
CHANNEL ] or [
▼
ºC/ºF WAVE ] to set the desired minutes.
4. Press [ SET/AL SET ] again until “A2” and “06:00” appear. Set alarm 2
using the same procedures used for setting alarm 1.
5. Press [ SET/AL SET ] again to return to normal time display. If no button
is pressed for approximately 10 seconds, the weather station will
automatically return to normal time display.
Turning the alarm on/off
Press [ Alarm on/off ] for activating or deactivating the individual alarms.
• When alarm 1 is activated
will appear.
• When alarm 2 is activated
will appear.
Snooze function
1. When the alarm sounds its respective alarm icon will flash.
2. Press [ Zz
] to activate the snooze function. The alarm will sound and
its respective alarm icon will flash again according to the snooze time that
has been previously set.
3. Press [ AL 1–2/ON-OFF ] to turn the alarm off. The specific set alarm will
then sound again after 24 hours if not deactivated.
Backlight dimmer
Press [ Zz
] to change the backlight intensity.
Temperature display
Press [ ºC/ºF
▼
WAVE ] for selecting temperature units in ºC or ºF.
Summary of Contents for IW006-DCF
Page 63: ......
