Prolon Control Systems
Lonbox PSW5000
Users Manual
Page 9
Network Variables
nviScene
LonMark network variable type name: SNVT_scene
LonMark network variable type id:
115
nvoSceneValue
LonMark network variable type name: SNVT_switch
LonMark network variable type id:
95
nviSetting
LonMark network variable type name: SNVT_setting
LonMark network variable type id:
117
Configuration Properties
Scene Numbers
LonMark configuration property type:
10
LonMark configuration property name: UCPTsceneNumber
Applies to:
Function Block
The list of scene number that will trigger sending one of the values in the UCPTsceneValue list.
The index of the scene number matches the index of the value, this means that it a scene recall is
received for the scene number in UCPTsceneNumber table index 4 the matching value from the
SCPTsceneValue table index 4 will be send.
Example: With the default configuration, if SC_RECALL 4 is received then the value 75% ON(1)
will be transmitted on the output.
Default value:
1,2,3,4,5,6,7,8,9,10
Scene Values
LonMark configuration property type:
49
LonMark configuration property name: SCPTsceneValue
Applies to:
Function Block
The scene values defined for the scene numbers in the UCPTsceneNumber list.
Default value:
0% OFF(0)
25% ON(1)
50% ON(1)
75% ON(1)
100% ON(1)
0% OFF(0)
0% OFF(0)
0% OFF (0)
0% OFF (0)
