5—10
5.1.14 On
You switch on the amplifier with this switch. After switching on there is a ventilator test for about 4-5
seconds, after which the amplifier is in ready mode.
Note:
At the end of the ventilator test you will hear a tiny pimple from the speakers connected. It is normal.
Important:
Please avoid switching on and off the amplifier too often, especially after playing at high volume level! After
playing at high volume level give the ventilator a few minutes to cool down the amplifier before switching it
off!
5.1.15 Mute LED
Multifunctional feedback LED.
Bright when:
-
the Mute button is pressed;
Or if unpressed:
-
after switching on, during the ventilator test
-
when the power stage is overheated
