Proluxe DP2010PID, Operation Manual

-3- DP20

0-1725-7/04 

WARNING 

In case of power cord damage, 
do not attempt to repair or 
replace the power cord.  Contact 
the manufacturer or the local 
distributor. 

WARNING

Avoid touching hot surfaces 
while operating the machine. 

CAUTION 

During normal operation, the 
base of the machine must be 
installed or placed above the wall 
socket. 

 CAUTION 

When servicing or cleaning the 
machine, make sure that the 
power cord is removed from the 
wall socket. 

Control Board Operations 
 

 
 
 
 
 
 
Solid State Controller 

 
This controller has three (3) control 
features: 
 

1.

Temperature – Temperature may 
be set from 

0

°-450°F (

0

°-

232°C).  The factory default 
setting is 2

40

°.  If you would like 

to change this setting, simply 
follow the 

Controller Operation

directions. 

2.

Counter – Cycle counter counts 
the number of applications from 
1 to 

9999

(see additional Notes – 

Counter).

3.

Timer – A timer mode is 
available upon special request.  If 
you would like to have the timer 
function installed, please call     
1-800-624-6717 

 
Controller Operation 
 

Temperature Control 

1.

Press the 

MODE 

button until 

temperature is displayed. 

2.

Push and hold 

SET

 button and 

simultaneously push UP (

V

) or 

DOWN (

W

) arrow buttons to the 

desired temperature setting. 

For the DP2000, both the upper 
and lower platens may be set to 
different temperatures. 
   

•

Upper Platen:

  Simply 

push the 

MODE 

button 

until the “upper” light is 
illuminated.  Adjust the 
temperature as noted 
above.   

•

Lower platen:

  Simply 

push the 

MODE

 button 

until the “lower” light is 
illuminated.  Adjust the 
temperature as noted 
above.