Prolyte H30V Rigging Tower
Assembly Instructions
Prolyte Products Group © 2001
page 6 of 9
Prolyte has made every effort to ensure the accuracy of this manual, no liability will be accepted for errors.
Prolyte reserves the right to change or alter their products or manuals without prior notice.
No part of this manual may be reproduced in any form or by any means without prior written permission.
Prolyte Products Group · phone: +31-594-851515 · fax: +31-594-851516 · www.prolyte.com
Build the mast from the parts as shown on
the drawing. Other lenghts may be used.
Make sure the stabilizer adapter is placed at
the connection of two trusses.
6
Mount the stabilizer attachment to the
trusses.
7
Attach the stabilizer tubes.
8
