PROMAG
DF7XX
REV.C
9
Non-MAD Sector: (Default =0)
When the card is Non-MAD format, DF7XX reader
will only read the “Non-MAD Sector”.
(1K Card Sector: 0~15, 4K Card Sector: 0~39). For the Non-MAD application, user can freely define the
Sector.
App Key (KEY_A): (Default=FFFFFFFFFFFF)
App Key must be the same as the KEY_A of the card issued. This means DF7XX reader only can read
the sector data on the card with the same KEY_A.
Encrypt: (Default=None)
Fraud prevention, Select Encrypt Mode (None, Encrypt 1, Encrypt 2, Encrypt 3, Encrypt 4, Encrypt 5) to
protected your card data. (Remark: Encrypt mode must to work together with the same encrypt mode of
“Mifare Card Issuer” software.)
Used Card (
Not issued by “Mifare Card Issuer”)
You have to indicate the data position in the card, when the card is not issued by
“Mifare Card Issuer”
software. And you must set the
“Offset” (Max 255, and base from zero) form the beginning of sector and
set your data
“Length” (Max 128).
Example:
If your card data in the grey grid of sector, you have to set the
“Offset” = 17, and set the “Length”= 20.
AID Sector (or Non-MAD Sector)
Block 0
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Block 1
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Block 2
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
