Promaker PRO-ES750KIT, User Manual

8

- Abrasive wheels shall be stored 

and handled with care in accordance 

with manufacturer’s instructions.

- Inspect the grinding wheel before 

use, do not use chipped, cracked or 

otherwise defective products.

- Ensure that mounted wheels and 

points are fitted in accordance with 

the manufacturer’s instructions.

- Ensure that blotters are used when 

they are provided with the bonded 

abrasive product and when they are 

required.

- Ensure that the abrasive product 

is correctly mounted and tightened 

before use and run the tool at no-

load for 30 s in a safe position, stop 

immediately if there is considerable 

vibration or if other defects are 

detected. If this condition occurs, 

check the machine to determine the 

cause.

- Do not use separate reducing 

bushings or adapters to adapt large 

hole abrasive wheels.

- For tools intended to be fitted with 

threaded hole wheel, ensure that the 

thread in the wheel is long enough 

to accept the spindle length.

- Check that the work piece is 

properly supported.

- Do not use cutting off wheel for 

side grinding.

- Ensure that sparks resulting from 

use do not create a hazard e.g. do 

not hit persons, or ignite flammable 

substances.

- Ensure that ventilation openings 

are kept clear when working in 

dusty conditions. If it should become 

necessary  to  clear  dust,  first 

disconnect the tool from the mains 

supply (use non metallic objects) 

and avoid damaging internal parts.

- Always use eye and ear protection. 

Other personal protective equipment 

such as dust mask, gloves, helmet 

and apron should be worn.

- The wheel continues to rotate after 

the tool is switched off.

- Never use the tool without the  

guard in place, the wheel guard 

must  be  fitted  on  the  tool  so  that 

the closed side of the guard always 

points toward the operator. 

4. Environmental Protection

CAUTION! This product has 

been marked with a symbol 

relating to removing electric 

and electronic waste. This 

means that this product shall 

not be discarded with household 

waste but that it shall be returned to 

a collection system which conforms 

to the European WEEE Directive. 

Contact your local authorities or 

stocks for advice on recycling. It