3
using loose cloths or jewelry. Keep
your hair, clothing and gloves away
from parts in motion. Loose clothes,
jewelry or long hair may get hooked.
3. Do not breathe polluted air.
Connect the tool into a local or remote
extraction system, if the task carried
out generates dust or smoke. Work in
fresh air areas wherever possible.
4. Avoid unintentional starts on. Be
sure that the switch is in OFF position
before connecting the battery or
lifting or carrying the tool. Carrying or
moving electric tools with the switch
on or the finger on the trigger may
cause accidents.
5. Do not exceed yourself. Keep good
support and balance at every moment.
This allows better control of the electric
tool in unexpected conditions.
6. Use personal protection equipment.
Always wear protection glasses. Anti-
dust mask, safety nonslip shoes,
protective helmet and/or hearing
devices used for each case reduce
risk of personal injuries.
Use and Care of the Tool:
1. Do not use the electric tool if the
switch does not turn it on and off. Every
electric tool that cannot be controlled
with the switch is a risk and has to be
repaired.
2. Electric tools not in use should
be kept away from the reach of
children! Do not allow that other
people operate this electric tool if
they are not acquainted with it and/or
its use instructions. Electric tools are
dangerous in hand of inexpert users.
3. Carry out periodic maintenance.
Check for deformations or deficient
joints of mobile parts; loose screws,
cracks of parts or any other condition
that may affect the operation of the
tool. If it is damaged, repair the electric
tool before use. Many accidents
are caused by electric tools in bad
condition.
4. Only use those accessories
recommended by the manufactures
for its tool model. Using accessories
proper for other tool in this one may
increase the risk of injuries.
Service and Repairs:
1. Repairs of your tool should be
carried out only by qualified personnel
using original spare parts. This will
guarantee safety and long life of your
electric tool.
2. Deficient repairs using unauthorized
parts may cause accidents.
SPECIFIC SECURITY RULES:
1. Ensure always keeping a stable
pose.
