background image

I N S TA L L AT I O N

ProMar1 Wiring Diagrams

12

Triple Output Charger for 3 12V Batteries

Important: The pair of red and black wires in 1 cable jacket MUST GO TO THE SAME 12VDC battery.

24 VDC Trolling Motor Battery Configuration with (2) 12 VDC Batteries Connected

with a Series Jumper Plus Dedicated 12 VDC Engine Start Battery

ProMar1

5/5/3

Output 3

AC po

wer

Output 2

Output 1

Indicates Jumper Series

Note:

Indicates Fuse

When connecting each jacketed battery charger cable, make sure it is connected
to only 

one 12 VDC battery

 and observe the polarity and color of all connections:

Red Wire =  +  (Positive) Battery connection

Black Wire =  -  (Negative) Battery connection
The black wire can never be connected to a terminal with red wires. Only black.

Installation

12 VDC Engine

Crank Battery

Two 12 VDC Batteries connected with a series

jumper for a 24 VDC Trolling Motor

Top View
of Battery

red

black

+

_

red

black

red

black

Cable 1

Bat 1

Bat 2

Bat 3

Cable 2

Cable 3

For Engine Battery use

this Bank Cable Only

+

_

+

_

I N S TA L L AT I O N

ProMar1 Wiring Diagrams

11

Dual Output Charger for 2 12V Batteries

Important: The pair of red and black wires in 1 cable jacket MUST GO TO THE SAME 12VDC battery.

Top View
of Battery

red

black

+

_

red

black

+

_

Bat 2

Bat 1

Cable 2

Cable 1

Indicates Jumper Series

Note:

Indicates Fuse

Dedicated 24 VDC Trolling Motor Battery Configuration

with (2) 12 VDC Batteries Connected with a Series Jumper

Two 12 VDC Batteries connected with a series jumper

for a 24 VDC Trolling Motor

For Engine Battery use

this Bank Cable Only*

*Note: When an engine crank battery is not being used this bank cable can be connected as shown for a 24 VDC trolling motor.

When connecting each jacketed battery charger cable, make sure it is connected
to only 

one 12 VDC battery

 and observe the polarity and color of all connections:

Red Wire =  +  (Positive) Battery connection

Black Wire =  -  (Negative) Battery connection
The black wire can never be connected to a terminal with red wires. Only black.

Installation

Output 2

AC po

wer

Output 1

ProMar1

5/5

Summary of Contents for 31405












Reviews: