Installing The Batteries
1. Turn off the power on your camera and the ON/OFF switch (10) of the grip. Slide the battery compartment release lever (13) in the
direction of the arrow and open the battery compartment door. Press both battery release levers (4,9) to release and remove the AA
battery holder.
2. For LP-E6 Li-ion Batteries: Insert up to two LP-E6 batteries into the battery grip and slide it in the direction as shown on the battery
door compartment. Close the battery door compartment cover.
3. For AA Batteries: Insert six AA batteries of the same type in the AA battery holder, while ensuring that they are in the correct
orientation. Mixing battery types or using fresh and used batteries together could result in deteriorated performance or damage to
the grip.
4. Insert the AA battery holder into the grip and close the battery chamber.
5. Switch the battery grip power (10) to ON and turn on the camera to check the battery level in the control panel or viewfinder.
One Year Unconditional Warranty
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this product to your ProMaster dealer and
it will be exchanged for you at no charge. ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship and
materials. If, at any time after one year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for
evaluation.
Specifications
Power Sources
2 x LP-E6 or 6xAA batteries(LR6, HR, FR)
Compatible Cameras
Canon EOS 7D
Replacement for
Canon BG-E7
Operating Temperature
32~104
°
F/ 0~40
℃
Dimensions
Approx. 5.83x4.49x3.03”/148x114x77mm
Weight (without batteries)
Approx.12 oz./340g (Excluding AA battery holder)
*
All the trademarks are the property of their respective owners. Specifications and design are subject to change without notice.
Code 1804
Made in China
WWW
.
PROMASTER
.
COM
|
FAIRFIELD
,
CT
06825