Attaching Your Camera
1. Please turn off your
camera and be sure the
Vertical Grip Operation
Switch (3) is in the 'OFF"
position.
2. Open the camera's
battery chamber.
3. Detach the chamber
cover by opening it to
approximately a 35 degree
angle and pulling it away
from the camera.
4. Store the camera battery
chamber cover in the
Camera Battery
Compartment Cover Slot
(10) on the grip.
5. Align the grip with the
camera paying attention to
the Power/Signal Contacts
(2) which go straight into the
camera’s battery chamber.
Also align the grip’s
Attachment Screw (7) with
the camera’s tripod socket.
6. Turn the Attachment Wheel
(8) in the direction of the
lock arrow to securely
fasten the power grip to
the tripod mount on your
camera.
