background image

 

 

 

PROMASTER

®

 One Year LIMITED WARRANTY: 

 

1)  To claim warranty service, return your product to your Authorized PROMASTER Dealer along with a copy 

of the original sales receipt from an Authorized PROMASTER dealer bearing the purchaser's name, date 

of purchase and description of the item being submitted for warranty service. If it is not practical to return it 

to your Authorized PROMASTER dealer, your product may be returned PREPAID to the PROMASTER 

WARRANTY CENTER listed below. 

2)  If, in the sole opinion of PROMASTER, this product has become non-functional due to a defect in the 

workmanship or materials at the original point of manufacturing, PROMASTER will repair or replace (at 

PROMASTER’s option) this product without charge. In the event of replacement, PROMASTER reserves 

the right to substitute a like reconditioned product with similar characteristics. If not prohibited by local law, 

a handling fee may apply. 

3)  This warranty will be considered NULL and VOID in the following cases: 

a) Damage to the product due to mishandling, alteration, accident, impact, sand and/or liquid or moisture damage,   

               tampering, battery or chemical corrosion, failure to follow operating, maintenance, or environmental  

               instructions prescribed by the instruction manual, shipping damage, excessive use; or,  

b) Damage caused during service performed by anyone other than the authorized PROMASTER service 
    center; or, 
c) If the product has had its serial number or other identifying data altered or removed; or 
d) Damage, defect, or unsatisfactory performance caused by the use of accessories not manufactured or 
    distributed by PROMASTER; or, 
e) The product was not purchased from an Authorized PROMASTER dealer. 

4)  In no event will PROMASTER be liable for any damage, including any loss of film, other inconvenience, 

lost profits, lost savings, or other incidental or consequential damages arising out of the use or inability to 

use this product. 

 
For service, return this product to your nearest PROMASTER Dealer (a listing may be found at www.promaster.com) or 

pack it carefully as to avoid any damage and return it prepaid to: 

PROMASTER WARRANTY CENTER 

2950 Turnpike Drive, Section 6 – 9 

Hatboro, PA 19040 

Be sure to include a copy of your sales receipt which clearly identifies your product, your name, and the date and place of 

purchase. In addition be sure to include a brief description of the problem you are experiencing with the product.  
 

Made in Taiwan                 

                                                                   

 

 

 

Summary of Contents for XtraPower Traveler +







Reviews: