Promate blueGear, User Manual

Operation Instructions:

1.    Turning the blueGear On/Off

•   Switch the power button to the “On” state. The Blue LED will flash thrice to

     indicate that the headset is switched on. You will also hear a prompt “Power On”.
•   Switch the power button to the “Off” state. The Red LED will flash thrice to 

     indicate that the headset is switched off. You will also hear a prompt “Power Off”.

2.    Pairing blueGear with your Bluetooth® device

You are required to pair blueGear with your mobile phone once before using it.
•   Press and hold the Multi-function button for 5 seconds until the blue LED

     and red LED start flashing alternately to enter pairing mode.
•   Activate Bluetooth® on your mobile phone.
•   Set your phone to discover ‘blueGear’ and follow the instructions.
•   If your phone asks for a passkey or PIN code, confirm with ‘0000’ (4 zeroes).

     When the phone and blueGear are paired and connected, blue LED flashes twice. 

3.    Pairing blueGear with a second Bluetooth device(Multipoint Pairing):

•   Follow the above instructions to pair the blueGear with the first device.

•   Press and hold the Multi-function button for 5 seconds until the blue LED

     and red LED start flashing alternately to enter pairing mode.

•   Activate Bluetooth® on your mobile phone.

•   Set your phone to discover "blueGear" and follow the instructions to pair 

             with the second device.

•   Find the "blueGear" in the first device and pairing again.

•   Two bluetooth device both connected now.

•    If your phone asks for a passkey or PIN code, confirm with ‘0000’ (4 zeroes).

      When the phone and blueGear are paired and connected, blue LED flashes twice.

4.    Answering a call:

•   

With one phone connected

      •   Short press Multi-Function button once to answer an incoming call.

4