4. Package contents
Slim Bluetooth™ Headset
USB charger
Earhooks
AC vent headset holder
User guide
Warranty card
5. Appearance
1. Earhook
2. Charging port
3. On/Off Switch
4. Volume button
5. LED indicator
6. Multifunction button
7. Speaker
8. Microphone
6. Operating instructions
• Turn on the headset. Slide the “Power Switch” to the “On” position. Then voice
prompt “Power on”
• Turn off the headset. Slide the “Power Switch” to the “Off” position. Then voice
prompt “Power off”
•
Entering pairing mode. If the headset has not been paired to any mobile device, it
enters to pairing mode when powered on.
o
If the headset has been paired to any mobile phone previously and needs to pair it
with another mobile phone, press and hold the Multifunction Button for 6 seconds
until the LED flashes in red and blue alternately. Pairing mode voice prompt
“Ready to Pair” when entering pairing mode. Once paired, voice prompt “Phone
One/Two Connected”.
o
For new pairing, turn on the Bluetooth™ on the mobile device.
o
Switch the Power to “On” to enter to pairing mode.
o
Once it is switched On, it goes automatically to pairing mode.
o
Search for a Bluetooth™ device from your mobile and select “Slim”.
3
o
If the mobile device requests for a passkey, type 0000.
o
The mobile device will confirm the pairing and may also ask to connect to the
Bluetooth™ headset. Select Yes or Ok.
• Answering a call. Press the Multifunction Button.
•
Rejecting a call. Press and hold the multifunction button for 2 seconds.
• Ending a call. Press the Multifunction button until voice prompt “Call Terminated
Phone One/Two”.
• Volume up/down. Press Vol+ to increase and Vol- to decrease.
• Transferring the call to the mobile device. During a call, press and hold the
Multifunction Button for 2 seconds to transfer the sound to phone and vice-versa
7. Multipoint Pairing
•
For Slim, follow the new pairing instruction to pair a mobile device 1. After mobile
device 1 is paired and connected successfully, power Off the Slim.
• Then power On again and hold down the Multifunction button for 5 seconds to enter
pairing mode once again.
•
Once Slim is on pairing mode once again, you may pair and connect the mobile
device 2.
•
Now that the mobile device 2 is paired and connected, the mobile device 1 needs to
be reconnected. Go to Bluetooth™ menu of mobile device 1 and select connect to
Slim.
• Check the connection status of mobile device 1 and 2 and make sure it is connected
with Slim
8. Multipoint Operation
• Incoming call from mobile device 2.
o
Short press the Multifunction button to hold the active call and accept the
incoming call.
o
Press and hold the Multifunction button for 2 seconds to end active call and accept
the incoming call.
o
Double press the Multifunction button to keep active call and reject the incoming
call.
• Whilst on Call hold status.
o
Short press the Multifunction button to swap active call from mobile device 1 to
mobile device 2.
o
Press and hold the Multifunction button for 2 seconds to end mobile device 1 .
