USER’S MANUAL. OS-782
02-2010
Page 36
To save a waveform on
CH1
in address A, do the following:
1. Press
the
MENU
key and the function menu appears at the right of the
screen.
2.
Press the “
MENU
▲
” or “
MENU
▼
” key to select the Waveform Saving. Four
items selectable are displayed at the bottom of the screen.
3. Press
the
F1
key to select the signal source
CH1
.
4. Press
the
F2
key to select the address A.
5. Press
the
F3
key to save the waveform on
CH1
in address A.
To display the saved waveform on the screen, do the following:
6. Press
the
F4
key to select Start for the address A. The waveform saved in
address A will be displayed on the screen in green color.
The display color is green, and the zero point of waveform k, voltage and time is
purple.
Now, you can see a screen that looks like the following figure 22.
Figure 22.-
Waveform Saving.
4.18
Function Setting Menu
Open the vertical menu of functions and select the
SYSTEM
function. The
parameters to be modified with
F1
∼
F5
keys will appear in the lower part of the display.
The function setting menu is described in the following list:
