USER’S MANUAL. OS-782
02-2010
Page 54
5.4.5 Making a DC voltage Measurement (VDC)
To measure a
DC
voltage, do the following:
1.
Press
the
V
key and
DCV
appears at the top of the screen.
2.
Insert the black lead into the
COM
banana jack input and the red lead into the
V/
Ω
banana jack input.
3.
Connect the red and black leads to the measured point and the measured
point voltage value is displayed on the screen. Now, you can see a screen
that looks like the following Figure 38.
Figure 38.-
DC voltage Measurement
5.4.6 Making a AC voltage Measurement (VAC)
To measure the AC voltage, do the following:
1.
Press
the
V
key and
DCV
appears at the top of the screen.
2.
Press
the
AUTO SET
key and
ACV
appears at the top of the screen.
3.
Insert the black lead into the
COM
banana jack input and the red lead into the
V/
/
Ω
banana jack input.
4.
Connect the red and black leads to the measured points and the AC voltage
values of measured points will be displayed on the screen.
