USER’S MANUAL. OS-782
02-2010
Page 58
4.
Plug current extended module in current measure jack, then plug the probe in
the module.
5.
Connect the red and black leads to the measured point and the
AC
current
value of the measured point will be displayed on the screen.
6.
Press
F4
return to 400mA measure.
Figure 43.-
AC current Measurement for 20A.
5.5
Freezing the Readings.
You can freeze the displayed readings at any time.
1.
Press
the
RUN /STOP
key to freeze the screen and
STOP
will be displayed at
the top right of the screen.
2.
Again, press the
RUN /STOP
key, you can resume your measurement.
Look at the display; you can see a screen that looks like the following figure 40.
