Page 4
June 2016
CAUTION
:
To avoid instruments being
damage from battery leakage,
always remove the batteries and
store them separately if the
multimeter is not going to be used
for a long period.
2.3
Adjusting the Tilt Stand
Pull the tilt- stand outward to its maximum reach (about
85 ° to the meter body).
2.4
Power On
To power ON the multimeter, turn the rotary switch to
any other position except
.
To power OFF the multimeter, turn the rotary switch
to the
position.
2.5
Sleep Mode
The multimeter automatically enters the sleep mode if the
rotary switch is not moved or a key is not pressed for
15 minutes. (When the Bluetooth is activated, this
function is disabled).
Pressing any key will turn the multimeter back to
operation mode from the sleep mode.
One minute before auto power-off, the buzzer will sound
“beep” five times to warn. Before it is shut off, the buzzer
will sound a long ”beep” then shut off.
