June 2016
Page 19
4
Tools
4.1
Data Hold Mode
Press
to freeze the display during
measurement,
will be shown on the display.
Press
again to exit this mode.
Note
:
This function is not available when measuring diodes
and transistor.
4.2
Capturing Max. and Min. Values
In MAX mode, the measured maximum value will be held; In
MIN mode, the measured minimum value will be held.
Press
to cycle between the MAX mode and
MIN mode.
Press
for more than 2 seconds to exit the
mode.
In this mode, the manual range mode will be activated
automatically. Analog bar graph is not displayed. Auto
power-off function is disabled.
Note
:
This function is not available when measuring diodes,
capacitance, transistor, and frequency.