Page 2
June 2016
2
Setting Up
2.1
General Inspection
After you get a new multimeter, make a check on the
instrument according to the following steps:
1. Check whether there is any damage caused by
Transportation.
If it is found that the packaging carton or the foamed
plastic protection cushion has suffered serious damage,
do not throw it away first till the complete device and its
accessories succeed in the electrical and mechanical
property tests.
2. Check
the
Accessories.
The supplied accessories have been already described in
this Manual. You can check whether there is any loss of
accessories with reference to this description. If it is
found that there is any accessory lost or damaged,
please get in touch with the distributor of PROMAX
responsible for this service or the PROMAX local offices.
3.
Check the Complete Instrument.
If it is found that there is damage to the appearance of
the instrument, or the instrument can not work
normally, or fails in the performance test, please get in
touch with the PROMAX distributor responsible for this
business or the PROMAX local offices. If there is
damage to the instrument caused by the transportation,
please keep the package.
