background image

USER GUIDE //

 EVACUATION CHAIR WITH TRACKS PS-190

Review 2021/09

5

01.1  Using of manual

 

The manual provides using and maintenance instructions of the product as well as technical aspects, func-

tioning, spare parts and safety.

It is recommended before the operation of the product to read carefully this manual in order to avoid da-

mages caused by a misuse.

Do not lose this document. It should be accessible to any doubt that could appear by medical personnel.

Remember that a good use and maintenance are necessary for the proper operation of the product.

01 

INTRODUCTION

01.2  Legend of Symbols

SYMBOL

EXPLANATION / DESCRIPTION

MANUFACTURER symbol. This symbol is accompanied by the name and address of the manufac-

turer, adjacent to the symbol (PRODUCTOS METÁLICOS DEL BAGÉS S.L., Ctra. C-16 Km 59.5, 08650 

Sallent (Barcelona)).
Indicates the manufacturer’s reference number to identify the medical device. 

PROMEBA, S.L. uses this symbol to set each internal reference for each configuration and business 

variant.

Indicates the manufacturer’s serial number to identify a specific medical device.

Indicates the manufacturing date. The symbol must be accompanied by a manufacturing date 

(yyyy-mm), adjacent to the symbol.

It is placed to inform that the product is a “Medical Device”.

CE symbol without the intervention of a Notified Organism, as a Medical Device classified as Class I 

according to the EU Regulation 2017/745 on Medical Devices.

Symbol for the Unique Device Identifier.

Symbol “See instructions for use or operating instructions”.

Symbol “caution”. This symbol is placed to warn of the need for the user to refer to important pre-

cautionary information in the operating instructions, such as warnings and cautions not otherwise 

found on the label.

Waste symbol for electrical and electronic equipment “WEEE” (Waste Electrical and Electronic Equi-

pment). Recycle: Electronic equipment. DO NOT THROW GARBAGE

“Dangerous voltage” symbol. To warn of electricity.

Symbol “Caution”. For a general warning.

“Double insulation” symbol. The protection of appliances marked with this symbol is ensured by 

double insulation and does not require a safety electrical connection to earth (ground).

Cot duty cycle: 16.7% (less than 60 seconds on, more than 300 seconds off)

Warning, crushing of hands

Indicates the temperature limits. The upper and lower temperature limits should be indicated adja-

cent to the horizontal lines.

+40ºC

-20ºC

Summary of Contents for PS-190





























Reviews: