Before operating the unit for the first time, please check that all contents have been delivered and
that the line voltage is correct. The supplied power adapter (
A
) is an electronic power supply
unit intended for an operating voltage of 100 V~ to 240 V~. Should you require a different
plug type for the operation of the device, you can purchase it from
Promed
. To change the
plug type, press the release (
M
) and pull the power plug (
N
) from the power supply unit (
A
).
Take the required power plug (
N
) and push it back into the power supply unit (
A
).
• The
Promed 1030
device is outstandingly suitable for manicure with the abrasive wheels
provided for this purpose, but especially for use in nail technique (nail design).
• The
Promed 1030
unit uses a high performance motor. The electronic speed control
is used to smoothly set the speed of the grinding head. The unit can rotate clockwise or
counterclockwise (reversible).
• The grinding head holder is able to fixate all commercial grinding heads with standardized
dental size shafts of (ø 2.332 to 2.350 mm / 0.091 - 0.093 inches). Please use only high-
quality grinding heads with a rounded shaft end and a maximal shaft length of 36 mm
(1.26 inches) to guarantee the longest life possible for the grinding head holder!
• If you want to remove the hand piece
(J)
, just insert it in the hand piece holder
(G)
provided for this purpose.
• Always make sure that the grinding head does not come in contact with other objects
when you lay the handpiece down. There is a risk of the shaft becoming compressed and
asymmetrical. Asymmetry in the grinding head causes damage to the handpiece!
• Grinding head bits are available at your local specialist retailer or
Promed
(www.promed.de).
• To ensure hygienic operation, the grinding heads must be disinfected after use.
• The handpiece may only be disinfected using disinfectant wipes.
• Information about suitable disinfectants and products can be obtained from
Promed
.
For disinfection of instruments and grinding heads:
Promed Pure ID
(Product No. 330810)
For disinfection of surfaces and devices:
Promed Pure FD
(Product No. 330815)
For disinfection and cleaning of instruments and grinding heads:
Promed UC-50
(Product No. 330210)
• If needed, the power adapter (Product No. 290426) and the handpiece (Product No. 201004)
can be purchased from
Promed
separately.
Scope of delivery:
1x Device 1030 (item 201001)
1x Handpiece MR10 (item 201004)
1x Power adapter (item 290426)
1x Instructions
Optional accessories:
A foot pedal (Product No. 290004) with an ON/OFF function is available as an accessory.
I
nFormatIon
on
the
unIt
/ s
CoPe
oF
DeLIVery
/
aCCessorIes
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI
