Pr
o
Minent
®
Page 23
Settings
7.5.4
Settings for the “flow” function (FLOW menu)
P
P
P
P
Continuous
display
w
o
l
f
Set
n
o
Set
Flow
8
0
0
Set
Flow
t
e
s
The flow menu only appears when a dosing monitor is connected to the “dosing monitor”
terminal. This dosing monitor registers each discharge stroke of the gamma/ L at the discharge
connector and transmits it back to the gamma/ L. If this response transmission is serially
omitted for a period set in the FLOW menu (due to failure or below-minimum dosing) the
gamma/ L stops.
7.6
Setting code (CODE menu)
The code menu is used to select whether you want to prevent access to parts of the settings
options.
P
P
P
Continuous
display
e
d
o
c
1
e
d
o
c
2
3
4
5
In the first menu option you can choose CODE 1 or CODE 2 (both use the same number).
•
Select CODE 1 to prevent access to the settings mode (
➀
in the overview “Operating /
settings diagram”, fold-out page). In the next menu option, enter the number you wish to
use as the code.
•
Select CODE 2 to prevent access to the settings options for directly alterable values in the
continuous displays (
➁
in the overview “Operating / settings diagram”, fold-out page). In the
next menu option, enter the number you wish to use as the code.
•
Select NONE to remove a pre-set security lock.
7.7
Cancel total stroke number or total litres (CLEAR window)
In the CLEAR window you can delete the stored total stroke number and simultaneously the to-
tal litres (= set to “0”). You may then press the P key briefly to exit this window.
The values displayed are counted incrementally from the point of commissioning the pump, or
from the last delete action.
P
Continuous
display
r
a
e
l
c
L
N
