22
ATEX Declaration of Incorporation
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL, Appendix I, BASIC
HEALTH AND SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
n
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
DE - 69123 Heidelberg, Germany,
hereby declare that the product specified below complies with the
relevant basic health and safety requirements of the Directive, on
the basis of its functional concept and design and in the version
distributed by us. Technical documents were produced in line with
Appendix VII Part B.
Any modification to the product not approved by us invalidates this
declaration.
Tab. 23: Extract from the Declaration of Incorporation
Designation of the product:
Metering pump without motor, product range Makro TZ,
Design for use in areas at risk of explosion in accordance with the ATEX
Directive (2014/34/EU)
Product type:
TZMb_ _ _ _ _ _ _ _ _ _ _ _ _ _ § A_ _ 0
TZHa_ _ _ _ _ _ _ _ _ _ _ _ _ _ § A_ _ &
TZKa_ _ _ _ _ _ _ _ _ _ _ _ _ _ § A_ _ 0
with characteristics
§ = "4" or "7" or "8" or "9" or "0"
& = "0" or "3"
Serial number:
see nameplate on the device
Relevant directives:
ATEX Directive (2014/34/EC)
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive
2014/35/EU according to Appendix I, No. 1.5.1 of the Machinery Direc‐
tive 2006/42/EC
RoHS Directive (2011/65/EU)
Harmonised standards applied,
in particular:
EN ISO 80079-36:2016, EN ISO 80079-37:2016,
EN ISO 12100:2010, EN 809:1998 + A1:2009/AC:2010
EN 50581:2012
Only start up the pump when it has been established that the machine into which the pump has been
installed complies with the provisions of the Machine Directive.
Ex-designation:
II 2G Ex h IIC T4 Gb X
X: max. media temperature 90 °C
Ambient temperature -10 °C ... +40 °C
for & = "3"
X: max. media temperature 80 °C
Ambient temperature -10 °C ... +40 °C
Assess the ignition risk when combining the pump and motor.
For pumps with explosion protection:
ATEX Declaration of Incorporation
97
