3
Transporting and storing the system
User qualification: trained user, see
Chapter 2.3 ‘Users' qualifications’
WARNING!
High system weight
Possible consequence: Death or severe injuries, if the floor
cannot support the system and breaks.
Measure: Ensure that the floor of the installation site can
support the weight of both the empty and full system.
WARNING!
Never stand under suspended loads.
Possible consequence: Fatal or very serious injuries
–
It is prohibited to walk under or stand underneath sus‐
pended loads
–
When lifting and transporting the Ultromat ensure it
cannot slip or topple
–
Use suitable approved lifting tackle. Observe the infor‐
mation given in the lifting equipment data sheets.
CAUTION!
Possibility of damage to the system during transport
Improper transport can result in system damage.
–
Only move the Ultromat
®
system when empty
–
The storage tank wall must not be subjected to point
loading
–
Avoid heavy vibration and impact loads
–
Only move the system with suitable hoisting and lifting
equipment
–
When using forklift trucks, use long forks, which extend
across the entire depth of the storage tank
–
If a crane is used, attach the slings, even if lifting lugs
are fitted, such that shear forces are avoided
Permissible ambient temperature: -5 °C to +50 °C.
Humidity: None. Rain and condensation not permitted.
Other: No dust, no direct sunlight.
Ambient conditions for storage and trans‐
port
Transporting and storing the system
14
