background image

FastTrak SX4030, SX4060, S150 SX4-M User Manual

62

Limited Warranty

Promise Technology, Inc. (“Promise”) warrants that for three (3) years from the 
time of the delivery of the product to the original end user:

a)

the product will conform to Promise’s specifications;

b)

the product will be free from defects in material and workmanship under 
normal use and service.

This warranty:

a)

applies only to products which are new and in cartons on the date of 
purchase;

b)

is not transferable;

c)

is valid only when accompanied by a copy of the original purchase 
invoice.

d)

Is not valid on spare parts, fans, and power supplies

This warranty shall not apply to defects resulting from:

a)

improper or inadequate maintenance, or unauthorized modification(s), 
performed by the end user;

b)

operation outside the environmental specifications for the product;

c)

accident, misuse, negligence, misapplication, abuse, natural or 
personal disaster, or maintenance by anyone other than a Promise or a 
Promise-authorized service center.

Disclaimer of other warranties

This warranty covers only parts and labor, and excludes coverage on software 
items as expressly set above.

Except as expressly set forth above, Promise DISCLAIMS any warranties, 
expressed or implied, by statute or otherwise, regarding the product, including, 
without limitation, any warranties for fitness for any purpose, quality, 
merchantability, non-infringement, or otherwise. Promise makes no warranty or 
representation concerning the suitability of any product for use with any other 
item. You assume full responsibility for selecting products and for ensuring that 
the products selected are compatible and appropriate for use with other goods 
with which they will be used.

Promise DOES NOT WARRANT that any product is free from errors or that it will 
interface without problems with your computer system. It is your responsibility to 
back up or otherwise save important data before installing any product and 
continue to back up your important data regularly.

Summary of Contents for FAST TRAK S150











































































Reviews: