FastTrak TX4650, TX2650 User Manual
78
If any bad sectors are found, they are listed here. WebPAM informs you by popup
and email messages when a bad sector error is logged. See page 57.
After 10 bad sectors have been discovered on a physical drive, WebPAM issues
a warning to replace the drive.
After 20 bad sectors have been discovered:
•
On fault-tolerant (RAID 1, 5, and 10) logical drives, the FastTrak controller
will set down the physical drive (take it offline) and the logical drive will go
critical.
Replace the physical drive and rebuild your logical drive. See “Responding
to a Critical or Offline Logical Drive” on page 101.
•
On non-fault-tolerant (RAID 0 or JBOD) logical drives, the physical drive
remains online.
Backup your data, replace the physical drive, create a new logical drive, and
copy your data to it.
See “Rebuilding a Logical Drive” on page 93 and “Responding to a Critical or
Offline Logical Drive” on page 101.
See the
SuperSwap User Manual
for more information about replacing a physical
drive.
Locating a Physical Drive
When it becomes necessary to access a physical drive installed in a SuperSwap
enclosure, this function will help you identify the physical drive you want. To
locate a physical drive:
1.
Click the Physical Drive View
icon in Tree View.
2.
Click the Physical Drive
icon.
3.
Click the
Locate Drive
tab in Management View.
