66
Promise
Technology
Pegasus3 Series
Making Controller Settings
To make controller settings:
1. From the Device menu, choose
Component List
.
2. Mouse-over the controller, then click the
Settings
button.
Make setting changes as required:
•
Enter, change or delete the alias in the
Alias
field.
•
SMART Log
– Check the box to enable or uncheck to disable.
•
SMART Polling Interval
– Enter a value into the field, 1 to 1440 minutes.
1440 minutes = 24 hours
•
Enable Coercion
– Check the box to enable or uncheck to disable.
•
Coercion Method
– Choose a method from the dropdown menu:
•
GBTruncate
•
10GBTruncate
•
GrpRounding
•
TableRounding
•
Write Back Cache Flush Interval
– Enter a value into the field, 1 to 12 seconds.
•
Enclosure Polling Interval
– 15 to 255 seconds.
•
Adaptive Writeback Cache
– Check the box to enable or uncheck to disable.
•
Forced Read Ahead
– Check the box to enable or uncheck to disable.
• Enable HDD Park Ahead (Level 1)
– Check the box to enable
• HDD Park Ahead Interval [10 - 1440] – Enter a value into the field, 1 to 1440 minutes.
1440 minutes = 24 hours
• Enable HDD Low Rotation Speed (Level 2)
– Check the box to enable
• HDD Low Rotation Speed Interval [10 - 1440] – Enter a value into the field, 1 to 1440
minutes.
1440 minutes = 24 hours
• Enable HDD Idle Spin Down (Level 1)
– Check the box to enable
• HDD Idle Spin Down Interval [10 - 1440] – Enter a value into the field, 1 to 1440
minutes.
1440 minutes = 24 hours
3. Click the
Save
button.
4. Click the
X
icon to close the settings panel.
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...
